Agilent Technologies 4294A Programming Manual

Chapter 16 317
GPIB Command Reference
FORM4
16. GPIB
Command Reference
( F - N )
FORM4
Syntax FORM4
Description Sets the transfer format for reading array data to the ASCII format (preset state). For details
about transfer formats, refer to
“Data Transfer Format” on page 78. (No query)
Corresponding
key
No front panel key is available to execute this function.
FORM5
Syntax FORM5
Description Sets the transfer format for reading array data to the MS-DOS personal computer format.
For details about transfer formats, refer to
“Data Transfer Format” on page 78. (No query)
Corresponding
key
No front panel key is available to execute this function.
FORMFEED
Syntax FORMFEED {ON|OFF|1|0}
FORMFEED?
Description Enables/disables form feed for printout.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Copy] - SETUP - more 1/2 - FORM FEED on OFF
Description
ON or 1 (initial value) Enables form feed.
OFF or 0 Disables form feed.

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English