406 Chapter 16
GPIB Command Reference
PURG
PURG
Syntax PURG <string>
Description Deletes the specified file on a built-in mass storage of the 4294A specified with the
“STOD” command on page 445. When specifying a file, use a file name including its
extension (refer to Table 8-1 on page 113). If the specified file does not exist, an error
occurs. (No query)
Parameters
If the specified file name has characters that exceed the maximum length, only the string of
up to the maximum length is valid and the remaining characters are ignored.
Corresponding
key
[Save] - FILE UTILITIES - PURGE FILE
<string>
Description File name (including the extension) you want to delete
Range 12 characters or less (including the extension)
To Next Page
Loading...
Need help?
General
