Chapter 16 319
GPIB Command Reference
INID
16. GPIB
Command Reference
( F - N )
INID
Syntax INID
Description Initializes a disk inserted in the flexible disk drive, RAM disk, and flash disk. (No query)
Corresponding
key
[Save] - FILE UTILITIES - FORMAT 
INP8IO?
Syntax INP8IO?
Description 4-bit data is inputted to the 4294A through IN0 to IN3 of the 8-bit I/O port and the data is
read out to the external controller. This command has the same function as the
READIO(15,0) command of Instrument BASIC. (Query only)
Query response {numeric}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
INPT?
Syntax INPT?
Description Reads out whether a pulse has been inputted to INPUT1 of the 24-bit I/O port, during the
period between the last execution of this command and present time. After reading out the
presence/absence of pulse inputs with this command, the no-pulse-input state occurs (the
query response is 0). (Query only)
Query response {1|0}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
{numeric}
Description Decimal value for the 4-bit binary data inputted from IN0 to IN3,
assuming that IN0 is LSB and IN3 is MSB.
Description
1 Indicates that a pulse has been inputted into INPUT1.
0 Indicates that no pulse has been inputted into INPUT1.
To Next Page
Loading...
Need help?
General
