Agilent Technologies 4294A - Savdtrc; Savmem

420 Chapter 16
GPIB Command Reference
SAVDTRC
SAVDTRC
Syntax SAVDTRC {ON|OFF|1|0}
SAVDTRC?
Description When saving the internal data array (refer to “Internal data arrays” on page 81) into a file
using the “SAVDASC” command on page 416 and “SAVDDAT” command on page 417,
enables/disables the save of the data trace array.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Save] - DATA - SELECT CONTENTS - TRACE DATA ON off
SAVMEM
Syntax SAVMEM {ON|OFF|1|0}
SAVMEM?
Description When saving the internal data array (refer to “Internal data arrays” on page 81) into a file
using the “SAVDASC” command on page 416 and “SAVDDAT” command on page 417,
enables/disables the save of the memory array.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Save] - DATA - SELECT CONTENTS - MEMORY on OFF
Description
ON or 1
(initial value)
Enables the save of the data trace array.
OFF or 0 Disables the save of the data trace array.
Description
ON or 1 Enables the save of the memory array.
OFF or 0
(initial value)
Disables the save of the memory array.