Agilent Technologies 4294A - Beepfail; Beepwarn

Chapter 16 271
GPIB Command Reference
BEEPFAIL
16. GPIB
Command Reference
( * , A - E )
BEEPFAIL
Syntax BEEPFAIL {ON|OFF|1|0}
BEEPFAIL?
Description Enables/disables the beep when the limit test result is FAIL.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[System] - LIMIT TEST - BEEP FAIL on OFF
BEEPWARN
Syntax BEEPWARN {ON|OFF|1|0}
BEEPWARN?
Description Enables/disables the beep when an error message is displayed or when an invalid key is
pressed.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[System] -BEEPER - BEEP WARN on OFF
Description
ON or 1 Enables the beep.
OFF or 0 (initial value) Disables the beep.
Description
ON or 1 Enables the beep.
OFF or 0 (initial value) Disables the beep.