Agilent Technologies 4294A Programming Manual

Chapter 16 283
GPIB Command Reference
COPT
16. GPIB
Command Reference
( * , A - E )
COPT
Syntax COPT {ON|OFF|1|0}
COPT?
Description Enables/disables the output of the time and date to a printer.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Copy] - SETUP - more 1/2 - TIME on OFF
COUT
Syntax COUT
COUT?
Description Sets the input/output direction of port C of the 24-bit I/O port to output.
To change the input/output direction of port C to input (preset state), use the “CIN”
command on page 278.
Query response {1|0}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
Description
ON or 1 Enables the output of the time and date.
OFF or 0 (Initial value) Disables the output of the time and date.
Description
1 Output is selected as the input/output direction of port C.
0 Input is selected as the input/output direction of port C.

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English