278 Chapter 16
GPIB Command Reference
CHAD
CHAD
Syntax CHAD <string>
Description Change the current directory under which file operation is performed. To change it to a
directory in a different mass storage, use the
“STOD” command on page 445 to change the
file operation target mass storage, and then execute this command. (No query)
Parameters
Use ".." (2 periods) as the directory name to move to the one-level upper directory.
Corresponding
key
[Save] - FILE UTILITIES - CHANGE DIRECTORY
CIN
Syntax CIN
CIN?
Description Sets the input/output direction of port C of the 24-bit I/O port to input (preset state).
To change the input/output direction of port C to output, use the “COUT” command on
page 283.
Query response {1|0}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
<string>
Description Change destination directory name
Range 8 characters or less
Description
1 Input is selected as the input/output direction of port C.
0 Output is selected as the input/output direction of port C.
To Next Page
Loading...
Need help?
General
