418 Chapter 16
GPIB Command Reference
SAVDS1P
SAVDS1P
Syntax SAVDS1P <string>
Description Converts the data array into the touchstone format and saves it into a specified file. You can
use a file name with or without the extension (refer to
Table 8-1, “Filename extension,”) to
specify a file. When you omit the extension, the extension ".S1P" is added to the specified
file name. (No query)
Parameters
If the specified file name exceeds the maximum number of characters, characters until the
maximum is reached are valid and remaining characters are ignored.
Equivalent key [Save] - TOUCHSTONE
<string>
Description A file name you want to save.
Range When you omit the extension: 8 characters or less
When you specify the extension: 12 characters or less
To Next Page
Loading...
Need help?
General
