Chapter 14 249
Using Printer
Printing onto a Printer Directly Connected to Agilent 4294A
1. Chapter Title
2. Chapter Title 3. Chapter Title
14. Using Printer
5. Chapter Title
How to print screen
Set the LCD screen as you desired then use the command below to start printing.
• “PRINALL” on page 405
Use the command below to abort your printing.
• “COPA” on page 282
The following items can be set for the printing.
Settings for the above items are stored in the non-volatile memory (SRAM), thus they do
not revert to the initial settings by executing
“PRES” command on page 404. Use the
command below to restore the initial settings.
• “DFLT” on page 297
Item Command Initial settings [Unit]
Printing resolution (DPI) “DPI” on page 308 75 [DPI]
Form feed “FORMFEED” on page 317 Yes
Media orientation
(Portrait/Landscape)
“LANDSCAPE” on page 324 Portrait
Left margin “LMARG” on page 342 1 [inch]
Top margin “TMARG” on page 455 1 [inch]
Softkey labels “PRSOFT” on page 405 Not printed
Time and date “COPT” on page 283 Not printed
Colors “PRIC” on page 405 Black and white
To Next Page
Loading...
Need help?
General
