324 Chapter 16
GPIB Command Reference
LANDSCAPE
LANDSCAPE
Syntax LANDSCAPE {ON|OFF|1|0}
LANDSCAPE?
Description Enables/disables landscape printing for printout.
Parameters
Query response {1|0}<newline><^END>
Corresponding
key
[Copy] - SETUP - more 1/2 - LANDSCAPE on OFF
LIMCLEL
Syntax LIMCLEL
Description In the creation/edit of the limit line table, deletes all segments. Executing this command
during the execution of segment creation/edit causes an error. If the creation/edit of the
limit line table has not been started, executing this command automatically starts table
creation/edit and then deletes all segments.(No query)
NOTE Executing the “LIMEDONE” command on page 326 brings the created/edited limit line
table to take effect.
Corresponding
key
[System] - LIMIT TEST - EDIT LIMIT LINE - CLEAR LIST
Description
ON or 1 Specifies landscape as the print direction.
OFF or 0 (initial value) Specifies portrait as the print direction.
To Next Page
Loading...
