Agilent Technologies 4294A Programming Manual

Chapter 16 449
GPIB Command Reference
SWPP
16. GPIB
Command Reference
( S - Z , :PROG )
SWPP
Syntax SWPP {FREQ|OLEV|DCB}
SWPP?
Description Sets the sweep parameter.
Parameters
Query response {FREQ|OLEV|DCB}<newline><^END>
Corresponding
key
[Sweep] - PARAMETER [ ] - {FREQ | OSC LEVEL | DC BIAS}
SWPT
Syntax SWPT {LIN|LOG|LIST}
SWPT?
Description Sets the sweep type.
Parameters
Query response {LIN|LOG|LIST}<newline><^END>
Corresponding
key
[Sweep] - TYPE [ ] - {LINEAR | LOG | LIST}
Description
FREQ (initial value) Specifies the frequency sweep.
OLEV Specifies the oscillator (OSC) level sweep.
DCB Specifies the dc bias level sweep.
Description
LIN (initial value) Specifies the linear sweep.
LOG Specifies the log sweep (settable only for frequency sweep).
LIST Specifies the list sweep.

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English