Agilent Technologies 4294A Programming Manual

Chapter 16 367
GPIB Command Reference
OSPT
16. GPIB
Command Reference
( O - R )
OSPT
Syntax OSPT <numeric>
OSPT?
Description Sets the value of the Positive Transition Filter of the Operation Status Register.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
OSR?
Syntax OSR?
Description Reads out the value of the Operation Status Condition Register. (Query only)
Corresponding
key
No front panel key is available to execute this function.
OUT1{H|L}
Syntax OUT1{H|L}
Description Sets OUTPUT1 of the 24-bit I/O port to HIGH (or LOW). (No query)
Corresponding
key
No front panel key is available to execute this function.
OUT1ENV{H|L}
Syntax OUT1ENV{H|L}
OUT1ENV{H|L}?
Description Makes the setting so that OUTPUT1 goes to HIGH (or LOW) when a pulse is inputted to
INPUT1 of the 24-bit I/O port.
Corresponding
key
No front panel key is available to execute this function.
<numeric>
Description Value of the filter
Range 0 to 65535
Initial value 0
Resolution 1

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English