Agilent Technologies 4294A Programming Manual

366 Chapter 16
GPIB Command Reference
OSER?
OSER?
Syntax OSER?
Description Reads out the value of the Operation Status Event Register. (Query only)
Corresponding
key
No front panel key is available to execute this function.
OSNT
Syntax OSNT <numeric>
OSNT?
Description Sets the value of the Negative Transition Filter of the Operation Status Register.
Parameters
If the specified parameter is out of the allowable setting range, the minimum value (if the
lower limit of the range is not reached) or the maximum value (if the upper limit of the
range is exceeded) is set.
Query response {numeric}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
<numeric>
Description Value of the filter
Range 0 to 65535
Initial value 0
Resolution 1

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English