162 Chapter 11
Using HP Instrument BASIC
Instrument BASIC Commands that Cannot be Run on the Agilent 4294A
Instrument BASIC Commands that Cannot be Run on the
Agilent 4294A
The commands given below are carried on “HP Instrument BASIC Language Reference”
in HP Instrument BASIC User's Handbook, but they cannot be run on HP Instrument
BASIC of the 4294A.
•OFF CYCLE
• ON CYCLE
NOTE The GCLEAR command and the ON TIMEOUT command have the following feature and
limitation besides those described in “HP Instrument BASIC Language Reference” in HP
Instrument BASIC User's Handbook.
• GCLEAR
Moves the pen to the origin (0,0).
• OFF TIMEOUT and ON TIMEOUT
The interface select code can be set to 7 only.
To Next Page
Loading...
Need help?
General
