Agilent Technologies 4294A Programming Manual

266 Chapter 16
GPIB Command Reference
ANAODATA
ANAODATA
Syntax ANAODATA
ANAODATA?
Description Selects the data trace as the target trace when performing analysis using the waveform
analysis command. Only either the data trace or memory trace can be specified as the
analysis target. After the execution of this command, executing the
“ANAOMEMO”
command makes the data trace to be no longer the analysis target.
When the measurement parameter is COMPLEX Z-Y, the analysis target is |Z| (for trace A)
or |Y| (for trace B).
Query response {1|0}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
ANAOMEMO
Syntax ANAOMEMO
ANAOMEMO?
Description Selects the memory trace as the target trace when performing analysis using the waveform
analysis command. Only either the data trace or memory trace can be specified as the
analysis target. After the execution of this command, executing the
“ANAODATA”
command makes the memory trace to be no longer the analysis target.
When the measurement parameter is COMPLEX Z-Y, the analysis target is |Z| (for trace A)
or |Y| (for trace B).
Query response {1|0}<newline><^END>
Corresponding
key
No front panel key is available to execute this function.
Description
1 (Initial value) The data trace is selected as the analysis target trace.
0 The data trace is not selected as the analysis target trace (in other
words, the memory trace is selected).
Description
1 The memory trace is selected as the analysis target trace.
0 (Initial value) The memory trace is not selected as the analysis target trace (in other
words, the data trace is selected).

Agilent Technologies 4294A Specifications

General

Brand	Agilent Technologies
Model	4294A
Category	Measuring Instruments
Language	English