Wall Clock
Parent Clock
Grandmaster
Clock
Foreign Masters
Offset
Shows the current offset from the master clock.
Mean path delay
Shows the mean path delay, which is the time from master to slave back to
master again, divided by two.
Sync timeout
Shows the current status of Sync Message reception. The Lamp icon
becomes red if no Sync Message has been received within five times the
Sync interval.
UTC
Shows the current UTC time. Requires an external GPS receiver.
Current
Shows the current wall clock time.
UTC offset
Shows the offset between the wall clock time and the UTC time.
This is available when the GPS is used as reference.
Identity
Shows the identity of a slave's parent clock.
Port number
Shows the port number of a slave's parent clock.
Identity
Shows the identity of the grandmaster.
Class
Shows the class of the grandmaster.
Accuracy
Shows the accuracy of the grandmaster.
Variance ann/est.
Shows the offset variance of the grandmaster. Both the announced value
and a calculated estimate are shown (in s
2
).
Priority 1/2
Shows priority 1 and 2 of the grandmaster.
Provides a list of detected foreign masters. The identity of the current master
is shown in the field, the other masters are listed in a drop-down menu.
Port number
Shows the port number of the currently selected foreign master.
Announce count
Shows the number of Announce Messages received from the currently
selected foreign master.
To Next Page
Loading...
