About This Manual
The documentation for MT1000A Network Master Pro applies to the instrument with the
MU100010A 10Gig Multirate Module installed. This operation manual describes both the
basic operation of the instrument as well as the operations available via interface options
and predefined applications/tests.
MT1000A/MU100010A Network Master Pro Operation Manual (this manual)
Operations for the MT1000A Network Master Pro mainframe with 10G Multirate
module (MU100010A) are described.
MT1000A/MU100010A Network Master Pro Quick Reference Guide
A printed quick user's guide that introduces the basic operation of the instrument.
MT1000A Network Master Pro MT1100A Network Master Flex
Remote Scripting Operation Manual
Operations of the command-based Remote Control function are described.
Manual structure
The contents of the manual is structured in the following way:
Chapter 1 - Introduction
Chapter 2 - Configuration
Chapter 3 - Man-Machine-Interface
Chapter 4 - Graphical User Interface
Chapter 5 - SDH/SONET/PDH/DSn Applications
Chapter 6 - Ethernet Application
Chapter 7 - OTN Applications
Chapter 8 - CPRI/OBSAI Applications
Chapter 9 - Fibre Channel (FC) Applications
Chapter 10 - Utility Applications
Chapter 11 - Specifications
Chapter 12 - Support
Chapter 4 consists of a general introduction to the GUI. Chapters 5-9 contain descriptions
of each screen, sub-screen and major dialog. The descriptions are provided in the
following order:
Setup and result screens for each application. The applications are described in the
same order as they appear on the application selector screen.
Ports setup screens and status information for each interface type.
Sub-screens and dialogs boxes are described under the main screen from which they are
activated/launched.
This operation manual assumes the reader has the following basic knowledge:
Ethernet, SDH/SONET, PDH/DSn, OTN, CPRI/OBSAI, Fibre Channel, handling optical
parts
To Next Page
Loading...
