Traffic duration
Touching the Generator button in the navigation area displays the following
screen.
This screen contains the traffic-related parameters.
Allows you to set conditions concerning frames transmission. Choosing
Continuous will make a continual test sequence. Alternatively, the duration
can be set manually in either Seconds or Frames, coupled with a
specification of the number of seconds/frames in the adjacent field.
Automatically start and stop traffic generator with the test
Select this check box to make the traffic generator start and stop
synchronously with the test starting/stopping.
9.2.2.3 Stream
Touching the Stream button in the navigation area displays the following
screen.
This screen contains the parameters for specifying a profile and pattern for
each stream and for specifying which measurements are made.
To Next Page
Loading...
