EasyManua.ls Logo

Anritsu Network Master Pro MT1000A - Page 441

Anritsu Network Master Pro MT1000A
449 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12.11 Laser Safety
12.11.1 Laser Safety Classifications
Class 1 indicate the danger degree of the laser radiation specified below
according to IEC 60825-1:2007.
Class 1:
Lasers that are safe under reasonably foreseeable conditions of
operation, including the use of optical instruments for intrabeam viewing.
WARNING
The laser in the plug-in unit provided for this equipment is classified as Class
1 according to the IEC 60825-1:2007 standard, and is safe under reasonably
foreseeable operating conditions.
CAUTION
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Table 1 Laser Safety Classifications Based on IEC 60825-1:2007
Model
Name
Class
Max. Optical
Output
Power (mW)*
Pulse Width
(s)/
Repetition
Rate
Emitted
Wavelength
(nm)
Beam
Divergence
(deg)
Laser
Aperture
Built-in
Laser
* Indicates the possible optical output power when each and every reasonably foreseeable single-
fault condition is included.
MU100010A 1 0.5 CW 850 31.9
Figure
1,[1],[2]
Table 2 (a)
1 0.5 CW 1310 11.5 Table 2 (b)
1 3.2 CW 1550 11.5 Table 2 (c)
1 0.8 CW 1310 11.5 Table 2 (d)
1 2.0 CW 1550 11.5 Table 2 (e)
1 3.2 CW 1550 11.5 Table 2 (f)
1 1.0 CW 1310 11.5 Table 2 (g)
1 2.0 CW 1310 11.5 Table 2 (h)
1 2.0 CW 1550 11.5 Table 2 (i)
1 1.0 CW 1310 11.5 Table 2 (j)
1 3.2 CW 1550 11.5 Table 2 (k)
1 1.0 CW 850 31.9 Table 2 (l)
1 1.2 CW 1310 11.5
Table 2
(m)
1 0.04 CW 1310 31.9 Table 2 (n)
1 0.8 CW 850 31.9 Table 2 (o)
1 0.8 CW 850 31.9 Table 2 (p)
Support Laser Safety
MT1000A Network Master Pro Page 441

Table of Contents

Other manuals for Anritsu Network Master Pro MT1000A

Related product manuals