H Commands
header-type
214
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
header-type
To set the ERSPAN source version, use the header-type command. To disable this feature, use the no
form of this command.
header-type version
no header-type version
Syntax Description
Defaults Enabled and is the recommended state.
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to change the ERSPAN source session from Type II to Type III:
switch# configure terminal
switch(config)# monitor session 3 type erspan-source
switch(config-erspan-src)# header-type 3
switch(config-erspan-src)#
Related Commands
version (Optional) specifies the ERSPAN source version 3.
Release Modification
6.1(1) This command was introduced.
Command Description
show logging onboard Displays onboard failure logs.
To Next Page
Loading...
