Cisco Nexus 7000 Series - Page 47

A Commands
alert-group
19
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to add the show ip routing command to the configuration alert group:
switch# config t
switch(config)# callhome
switch(config-callhome)# alert-group Configuration user-def-cmd “show ip routing”
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
callhome Enters the Call home configuration mode.
callhome distribute Enables CFS distribution of the Call home configuration.
show callhome
destination-profile
name
Displays one or more Call home destination profiles.