Cisco Nexus 7000 Series - Page 531

Show Commands
show hardware flow entry
503
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
elif(ovld_b) = 0x0
tos(ovld_e) = 0
l4_protocol = 0
l4_hdr_vld = 0
fragment = 0
mpls = 0
l4_info(ovld_d) = 0x00000000
ipv4_sa(ovld_f) = 0.0.0.0
ipv4_da(ovld_g) = 0.0.0.0
ipmac = 0
segment = 0
hash_addr = 0x0
icam = 0
create_ts = 0
sh_plc_idx/sampler_id = 0x0
rdt_tbl_idx = 0x0
ignr_aclo = 0
ignr_qoso = 0
ignr_acc = 0
ignr_agg_qos = 0
tcp_rdt_dst = 0
copy_policy_idx = 0x0
nf_acos = 0
mark_en = 0
nf_qos_mode = 0
policer_param_idx = 0x0
elam_trig = 0
valid = 0
sw_entry = 0
profile_merged = 0
fast_ag_en = 0
sw_bits1 = 0
dgt_mode = 0
adj_ptr/dgt = 0x0
ignr_qosi = 0
ignr_acli = 0
NS Entry Info (dev_id = 0, ns_entry_addr = 0x00000000):
ack_after_fin = 0
tcp_flag = 0x0 (URG=0, ACK=0, PSH=0, RST=0, SYN=0, FIN=0)
mf_ls_ts = 0
mf_bkt = 0
nf_pkt_cnt = 0000000000
nf_byte_cnt = 0000000000000
nf_byte_cnt_excd = 0000000000000
ls_used_ts = 0
sw_prog/sticky_status = 0
Related Commands Command Description
flow Creates a flow.