Show Commands
show logging onboard
546
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
Device Error Name : SKY_NI_ERR_BM_B1_3_BIST_FAILED
Sys Error : Skyline ni module experienced an error
Errtype : NON-CATASTROPHIC
PhyPortLayer : Fibre Channel
Port(s) Affected : 13-18
Error Description : Skyline BM B1_3 BIST for interface 2 timed out during init
DSAP : 0
UUID : 0
Time : Sun Feb 24 00:11:25 2008
switch#
Table 9 describes the significant fields shown in the display.
This example shows how to display the OBFL history information:
switch# show logging onboard module 2 obfl-history
OBFL history records:
---------------------
Sat Feb 29 30 18:09:57 2008 : OBFL all logs cleared
Sat Feb 29 18:47:53 2008 : OBFL miscellaneous-error logs cleared
Sat Feb 29 20:07:45 2008 : OBFL miscellaneous-error logs cleared
switch#
The show logging onboard obfl-history command displays the following information:
• Timestamp when OBFL is manually disabled.
• Timestamp when OBFL is manually enabled.
• Timestamp when OBFL data is manually cleared.
This example shows how to display the OBFL kernel stack trace information:
switch# show logging onboard module 2 stack-trace
==================== STACK TRACE ====================
Logging time: Sat Feb 29 19:47:38 2008
watchdog timeout: process swapper (0), jiffies 0x169bb
Stack: c0006e98 c001721c d195f5b4 c0005424 c0005500 c0003e90 c0005a2c c0005a40
c0001a88 c01bf610 c0000394
Ta b l e 9 show logging onboard exception-log Command Output
Field Description
Sun Feb 24 00:12:35 2008: Date and time the exception was recorded.
Device Id: Device identification number.
Device Name: Device name.
Device Error Code Device specific error code.
Device Error Name: Name of the device error.
Sys Error: System error message.
Errtype: Error type.
PhyPortLayer: Physical layer type.
Port(s) Affected: Number of the ports affected.
Error Description: Description of the error.
DSAP: Destination session announcement protocol
(DSAP) identification.
UUID: Universal unique identifier (UUID).