D-Link DGS-3000

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
137
disable bpdu_protection 11-5
Description
This command is used to disable BPDU protection function globally for the Switch.
Format
disable bpdu_protection
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable bpdu_protection function globally for the entire switch:
DGS-3000-26TC:admin#disable bpdu_protection
Commands: disable bpdu_protection
Success.
DGS-3000-26TC:admin#
show bpdu_protection 11-6
Description
This command is used to display BPDU protection global configuration or per port configuration
and current status.
Format
show bpdu_protection {ports {<portlist>}}
Parameters
ports - (Optional) Specify a range of ports to be configured.
<portlist> - Enter the portlist here.
Restrictions
None.
Example
To show the bpdu_protection for the entire switch: