D-Link DGS-3000 - Page 436

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
432
To show the ND snooping maximum entry information for ports 1-5:
DGS-3000-26TC:admin#show address_binding nd_snoop ports 1-5
Command: show address_binding nd_snoop ports 1-5
Port Max Entry
---- ---------
1 10
2 10
3 10
4 No Limit
5 No Limit
DGS-3000-26TC:admin#
show address_binding nd_snoop binding_entry 39-21
Description
This command is used to show the ND snooping binding entries on the Switch.
Format
show address_binding nd_snoop binding_entry {port <port>}
Parameters
port - (Optional) Specify a port used for this display.
<port> - Enter the port number used for this display here.
Restrictions
None.
Example
To show the ND snooping binding entry: