DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
434
Format
enable address_binding trap_log
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the IMPB traps and logs:
DGS-3000-26TC:admin#enable address_binding trap_log
Command: enable address_binding trap_log
Success.
disable address_binding trap_log 39-24
Description
This command is used to disable the IMPB traps and logs.
Format
disable address_binding trap_log
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable IMPB traps and logs:
To Next Page
Loading...
