D-Link DGS-3000 - Page 501

DGS-3000 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
497
Example
To display outbound LLDP advertisements for port 1 in detailed mode. Port description on the
display should use the same value as ifDescr.
DGS-3000-26TC:admin#show lldp local_ports 1 mode detailed
Command: show lldp local_ports 1 mode detailed
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype : MAC Address
Port ID : 00-01-02-03-04-01
Port Description : D-Link DGS-3000-26TC R1.10.013
Port 1
Port PVID : 1
Management Address Count : 1
Subtype : IPv4
Address : 10.90.90.90
IF Type : IfIndex
OID : 1.3.6.1.4.1.171.10.133.2.1
PPVID Entries Count : 0
(None)
VLAN Name Entries Count : 1
Entry 1 :
VLAN ID : 1
VLAN Name : default
Protocol Identity Entries Count : 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
To display outbound LLDP advertisements for port 1 in normal mode: