Dynon Avionics SkyView Classic - Page 157

SV-EMS-220/221 Installation and Configuration
SkyView System Installation Guide - Revision AA 7-17
Pin
EMS 37-pin
Harness Wire
Color
Function
Sensor Config
32
White/Green
Standard RPM Input Left
RL
33
White/Blue
Standard RPM Input Right
RR
34
Blue
Low Voltage RPM Input Left - do not connect to magneto
RL
35
Green
Low Voltage RPM Input Right – do not connect to magneto
RR
36
Blue or Unwired
SV-EMS-220: General Purpose TC Input 2+
Thermocouple +
SV-EMS-221: Lane A/B – Can H (HC A Pin 6, HC B Pin 8)
Rotax 912 iS ECU
37
Green or Unwired
SV-EMS-220: General Purpose TC Input 2-
Thermocouple -
SV-EMS-221: Lane A/B – CAN L (HC A Pin 5, HC B Pin 7)
Rotax 912 iS ECU
Table 30 – SV-EMS-220/221 D37M Pin-to-Sensor Compatibility
Figure 59 – SV-EMS-220 37-pin Main Sensor Harness D37F Pin Insertion View (Rear)