Dynon Avionics SkyView Classic - Page 535

Appendix I: SkyView System Installation Guide Revision History
SkyView System Installation Guide - Revision AA 29-5
Revision
Revision Date
Description
o Added: EMS serial output stream capability.
o Added: Option to disable flight path marker.
o Added: Option to disable extreme pitch warning indication chevrons.
o Added: Software version now listed in LOCAL SCREEN SETUP > SCREEN
HARDWARE INFORMATION.
o Improved: Flap widget display on 20% EMS page.
o Improved: PFD, EMS, MAP page select buttons are now PFD PG, ENGN PG,
MAP PG.
o Fixed: Incomplete backup functionality removed from setup menu.
o Fixed: Erratic G-meter readings at higher G loads.
 Software changes in SkyView Software v3.1.1 released July, 2011 (no documentation
changes):
o Fixed: Vulnerability that can cause a SkyView display to fail on power-up in
rare circumstances.
 Removed Create System Backup description.
 Added description of EMS serial data.
 Changed Screen Hardware to Display Hardware.
 Add flight path marker and extreme pitch warning menu items.
 Clarified SV-GPS-250 connectivity.
 Clarified that Ethernet is designed to be connected permanently.
 239 pages
I
September, 2011
 Document number changed to 101320-008
 Software changes in SkyView Software v3.2:
o Added: Map panning mode - allows ability to move around the map with
the map pointer. Map pointer can be navigated "direct-to", and map
pointer locations can be added to flight plans.
o Added: Support for external (typically certified) serial altitude encoder to
provide pressure altitude to the SV-XPNDR-26X in lieu of SkyView's own
pressure altitude.
o Added: Support for state/country boundaries via download from Dynon
Avionics website. Units that ship with 3.2 or later have this database pre-
installed.
o Added: OAT adjustment capability.
o Added: EMS serial output stream capability.
o Added: NMEA serial output.
o Added: DYNON ADAHRS and SYSTEM serial data output formats.
o Added: VP-X support. Requires VP-X hardware and license from Dynon
Avionics.
o Improved: Tachometer default text is now TACH/RPM instead of RPM/RPM.
o Improved: VOR directional information on MAP INFO pages now expressed
in terms of radials instead of bearing.
o Improved: License UI improved to reduce confusion.
o Improved: Bug/baro windows highlight in cyan when adjusted.
o Improved: Bug/baro windows are outlined in white when knob is set to
control them.
o Improved: More display dimming steps available for finer control of display
brightness.
o Improved: Knob scrolling acceleration removed in menus and when
choosing characters.
o Improved: Font sizes increased and screen layouts adjusted to improve
legibility, particularly on the SV-D700 display.
o Changed: XPNDR menu no longer exits all the way to the main menu after a
CODE is entered. Instead goes back to the XPNDR menu.
o Fixed: Power switching bug causing display flicker at roughly 10.3V input
voltage when SV-BAT-250 is connected.
o Fixed: Removed phantom course pointers after GPS "direct-to" cancelled.
o Fixed: SV-BAT-250 charge indication in setup menu.
o Fixed: Serial port problems that was created between 3.1 and 3.1.1.
Primarily affected serial ports 1 and 2 ability to communicate properly with
external devices on some displays.
 Software changes in SkyView Software v3.2.1 released October, 2011 (no
documentation changes):