Endress+Hauser Proline Promag 300 - Page 112

Description of device parameters Proline Promag 300 Modbus RS485
112 Endress+Hauser
Q
20
4
0
I [mA]
1 2
A0028084
 3 Measuring range
I Current
Q Flow
1 Lower range value (value assigned to 0/4 mA current)
2 Upper range value (value assigned to 20 mA current)
With the following flow response:
t
Q
A0028091
 4 Flow response
Q Flow
t Time
With Forward flow option
The current output signal is proportional to the process variable assigned. The flow
components outside the scaled measuring range are not taken into account for signal
output:.
t
I [mA]
A0028092
I Current
t Time
With Forward/Reverse option
The current output signal is independent of the direction of flow.
t
I [mA]
A0028093
I Current
t Time
With Rev. flow comp. option