Endress+Hauser Proline Promag 300 - Page 177

Proline Promag 300 Modbus RS485 Description of device parameters
Endress+Hauser 177
Timestamp
Navigation  Expert → Diagnostics → Diagnostic list → Timestamp
Description Displays the operating time when the diagnostic message with the third-highest priority
occurred.
User interface Days (d), hours (h), minutes (m) and seconds (s)
Additional information Display
The diagnostic message can be viewed via the Diagnostics 3 parameter (→  176).
Example
For the display format:
24d12h13m00s
Diagnostics 4
Navigation  Expert → Diagnostics → Diagnostic list → Diagnostics 4 (0695)
Description Displays the current diagnostics message with the fourth-highest priority.
User interface Symbol for diagnostic behavior, diagnostic code and short message.
Additional information Display
Via the local display: the time stamp and corrective measures referring to the cause of
the diagnostic message can be accessed via the  key.
Examples
For the display format:
• F271 Main electronics
• F276 I/O module
Timestamp
Navigation  Expert → Diagnostics → Diagnostic list → Timestamp
Description Displays the operating time when the diagnostic message with the fourth-highest priority
occurred.
User interface Days (d), hours (h), minutes (m) and seconds (s)