Ericsson ECN330 - Show Vrrp Interface Counters

Command Line Interface
10131553-KDU 137 365 Uen D 2006-06-16
7.24.11 show vrrp interface counters
This command displays counters for VRRP protocol events and errors that have
occurred for the specified group and interface.
Syntax
show vrrp <group> interface vlan <interface> counters
• group - Identifies a VRRP group. (Range: 1-255)
• interface - Identifier of configured VLAN interface. (Range: 1-
4094)
Defaults
None
Command Mode
Privileged Exec
Example
Refer to “Displaying VRRP Group Statistics” on page 395 for a description of the
display items.
Console#show vrrp 1 interface vlan 1 counters
Total Number of Times Transitioned to MASTER : 6
Total Number of Received Advertisements Packets : 0
Total Number of Received Error Advertisement Interval Packets : 0
Total Number of Received Authentication Failures Packets : 0
Total Number of Received Error IP TTL VRRP Packets : 0
Total Number of Received Priority 0 VRRP Packets : 0
Total Number of Sent Priority 0 VRRP Packets : 5
Total Number of Received Invalid Type VRRP Packets : 0
Total Number of Received Error Address List VRRP Packets : 0
Total Number of Received Invalid Authentication Type VRRP Packets : 0
Total Number of Received Mismatch Authentication Type VRRP Packets : 0
Total Number of Received Error Packet Length VRRP Packets : 0
Console#