Ericsson ECN330 - Dhcp Server

Command Line Interface
980 1553-KDU 137 365 Uen D 2006-06-16
DHCP Server
The commands in this section configure a DHCP service on the ECN330-switch
using address pools or static bindings.
Table 117 DHCP Server Commands
Command Function Mode Page
service dhcp Enables the DHCP server feature on the
ECN330-switch
GC 981
ip dhcp excluded-
address
Specifies IP addresses that a DHCP server
should not assign to DHCP clients
GC 982
ip dhcp pool Configures a DHCP address pool on a DHCP
Server
GC 983
network Configures the subnet number and mask for a
DHCP address pool
DC 984
default-router Specifies the default router list for a DHCP client DC 985
domain-name Specifies the domain name for a DHCP client DC 986
dns-server Specifies the Domain Name Server (DNS)
servers available to a DHCP client
DC 986
next-server Configures the next server in the boot process of
a DHCP client
DC 987
bootfile Specifies a default boot image for a DHCP client DC 988
netbios-name-
server
Configures NetBIOS Windows Internet Naming
Service (WINS) name servers available to
Microsoft DHCP clients
DC 989
netbios-node-type Configures NetBIOS node type for Microsoft
DHCP clients
DC 990
lease Sets the duration an IP address is assigned to a
DHCP client
DC 991