Command Line Interface
10831553-KDU 137 365 Uen D 2006-06-16
7.26.41 show ip ospf
This command shows basic information about the routing configuration.
Command Mode
Privileged Exec
Example
Table 133 show ip ospf - Display Description
Console#show ip ospf
Routing Process with ID 10.1.1.253
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Redistributing External Routes from,
rip with metric mapped to 10
Number of area in this router is 2
Area 0.0.0.0 (BACKBONE)
Number of interfaces in this area is 1
SPF algorithm executed 19 times
Area 10.1.0.0
Number of interfaces in this area is 4
SPF algorithm executed 19 times
Console#
Field Description
Routing
Process with
ID
Router ID
Supports
only single
TOS (TOS0)
route
Type of service is not supported, so only one cost per
interface can be assigned
It is an
router type
The types displayed include internal, area border, or
autonomous system boundary routers
To Next Page
Loading...
