Ericsson ECN330 - Acl Information

Command Line Interface
7331553-KDU 137 365 Uen D 2006-06-16
• Entering show vlan filter vlan followed by a specified vlan only
displays filter information about the specified VLAN.
Example
Related Commands
vlan access-map (section 7.8.18 on page 720)
show vlan filter access-map (section 7.8.21 on page 725)
vlan filter (section 7.8.25 on page 731)
ACL Information
This section describes commands used to display ACL information.
Table 71 ACL Information Commands
Console#show vlan filter access-map vlanMAP1
VLAN Access-map: vlanMAP1
Applied VLAN Lists: 1, 2
Match IP ACL: ipACL1
Match MAC ACL: macACL1
Action: forward
Console#show vlan filter vlan 1
VLAN ID: 1
Access-map: vlanMAP1
Match IP VLANACL: ipACL1
Match MAC VLANACL: macACL1
Action: forward
Console#
Command Function Mode Page
show access-list Show all ACLs and associated rules PE 734
show access-group Shows the ACLs assigned to each port PE 735
show vlan filter Displays information about the specified VLAN
access map or all VLAN access maps
PE 732
show vlan filter
access-map
Displays information about a particular VLAN
access map or for all VLAN access maps
PE 725