Command Line Interface
6011553-KDU 137 365 Uen D 2006-06-16
7.5.46 sntp client
This command enables SNTP client requests for time synchronization from NTP
or SNTP time servers specified with the sntp servers command. Use the no
form of this command to disable SNTP client requests.
Syntax
[no] sntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates
and times for log events. Without SNTP, the ECN330-switch only
records the time starting from the factory default set at the last bootup
(that is, 00:00:00, Jan. 1, 2001).
• This command enables client time requests to time servers specified
through the sntp servers command. It issues time synchronization
requests based on the interval set through the sntp poll command.
To Next Page
Loading...
