Command Line Interface
614 1553-KDU 137 365 Uen D 2006-06-16
7.6.5 snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (section 7.6.4 on page 613)
Console(config)#snmp-server location Copenhagen-Site1
Console(config)#
To Next Page
Loading...
