Ericsson ECN330 - Show Map Ip Precedence

Command Line Interface
9171553-KDU 137 365 Uen D 2006-06-16
Command Mode
Privileged Exec
Example
The following shows that HTTP traffic has been mapped to CoS value 0:
Related Commands
map ip port (Global Configuration) (section 7.19.10 on page 910)
map ip port (Interface Configuration) (section 7.19.11 on page 911)
7.19.17 show map ip precedence
This command shows the IP precedence priority map.
Syntax
show map ip precedence [interface]
interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330
(Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
Console#show map ip port
TCP port mapping status: disabled
Port Port no. COS
--------- -------- ---
Eth 1/ 5 80 0
Console#