Ericsson ECN330 - Show Rip Globals

Command Line Interface
10491553-KDU 137 365 Uen D 2006-06-16
Example
This example sets the authentication mode to plain text.
Related Commands
ip rip authentication key (section 7.26.15 on page 1047)
7.26.17 show rip globals
This command displays global configuration settings for RIP.
Command Mode
Privileged Exec
Example
Table 130 show rip globals - Display Description
Console(config)#interface vlan 1
Console(config-if)#ip rip authentication mode text
Console(config-if)#
Console#show rip globals
RIP Process: Enabled
Update Time in Seconds: 30
Number of Route Change: 0
Number of Queries: 1
Console#
Field Description
RIP Process Indicates if RIP has been enabled or disabled.
Update Time in
Seconds
The interval at which RIP advertises known route
information. (Default: 30 seconds)