Command Line Interface
9431553-KDU 137 365 Uen D 2006-06-16
7.21.7 ip igmp snooping querier
This command enables the ECN330-switch as an IGMP querier. Use the no
form to disable it.
Syntax
[no] ip igmp snooping querier
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• IGMP snooping querier is not supported for IGMPv3 snooping (see ip
igmp snooping version, section 7.21.4 on page 939).
• If enabled under IGMPv1 or v2 snooping, the ECN330-switch will serve
as querier if elected. The querier is responsible for asking hosts if they
want to receive multicast traffic.
Example
Console(config)#ip igmp snooping querier
Console(config)#
To Next Page
Loading...
