Command Line Interface
766 1553-KDU 137 365 Uen D 2006-06-16
7.10.7 show lacp
This command displays LACP information.
Syntax
show lacp [<port-channel>] {counters | internal |
neighbors | sys-id}
• port-channel - Local identifier for a link aggregation group.
(Range: 1-13)
• counters - Statistics for LACP protocol messages.
• internal - Configuration settings and operational state for local
side.
• neighbors - Configuration settings and operational state for
remote side.
• sys-id - Summary of system priority and MAC address for all
channel groups.
Default Setting
Port Channel: all
Command Mode
Privileged Exec
To Next Page
Loading...
