Command Line Interface
1026 1553-KDU 137 365 Uen D 2006-06-16
7.25.9 show arp
This command displays entries in the Address Resolution Protocol (ARP)
cache.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays information about the ARP cache. The first line
shows the cache timeout. It also shows each cache entry, including the
corresponding IP address, MAC address, type (static, dynamic, other), and
VLAN interface. Note that entry type “other” indicates local addresses for
this router.
Example
This example displays all entries in the ARP cache.
Console#show arp
Arp cache timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
10.1.0.0 ff-ff-ff-ff-ff-ff other 1
10.1.0.254 00-00-ab-cd-00-00 other 1
10.1.0.255 ff-ff-ff-ff-ff-ff other 1
123.20.10.123 02-10-20-30-40-50 static 2
345.30.20.23 09-50-40-30-20-10 dynamic 3
Total entry : 5
Console#
To Next Page
Loading...
