Command Line Interface
848 1553-KDU 137 365 Uen D 2006-06-16
Command Mode
Normal Exec, Privileged Exec
Example
Related Commands
garp timer (section 7.17.1.5 on page 846)
Editing VLAN Groups
This section describes commands used to configure VLANs on the ECN330-
switch.
Table 91 Commands for Editing VLAN Groups
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Command Function Mode Page
vlan database Enters VLAN database mode to add, change, and
delete VLANs
GC 849
vlan Configures a VLAN, including VID, name and
state
VC 850
management vlan Configures the management VLANs GC 851
To Next Page
Loading...
