Introduction to this Guide
11553-KDU 137 365 Uen D 2006-06-16
1 Introduction to this Guide
This guide describes the ECN330 Ethernet Layer 3 switch. It describes the
hardware, functionality and installation process. Furthermore, it provides an
overview of the software features, and detailed information on how to use the
Command Line Interface (CLI) to configure the ECN330-switch.
This guide is intended for both installers and system administrators responsible
for operating and maintaining network equipment. For reading and using the
management and CLI sections, a basic working knowledge of general switch
functions, the Internet Protocol (IP), and Simple Network Management Protocol
(SNMP) is needed. This guide does not attempt to give a complete explanation
of different standards (for example spanning tree), but rather their
implementation in the ECN330-switch. For a more comprehensive knowledge
and understanding of the standards, please refer to the standards.
This section gives a short introduction to this guide.
Section 2 on page 5 provides an overview of the switch system and its
functionality.
Section 3 on page 17 describes maintenance tasks.
Section 4 on page 21 provides an overview of the switch’s management
features.
Section 5 on page 35 describes initial configuration options and other basic
system information.
Section 6 on page 51 describes how to configure the switch’s software features
and provides details on the web user interface.
Section 7 on page 515 describes how to use the switch’s CLI and provides
details on all available commands.
Section 8 on page 1167 describes how to download switch software updates.
Section 9 on page 1171 discusses troubleshooting issues.
To Next Page
Loading...
Need help?
General
