Command Line Interface
876 1553-KDU 137 365 Uen D 2006-06-16
• Ports assigned to an isolated VLAN cannot pass traffic between group
members, and can only communicate with resources outside of the
group via promiscuous ports in the associated primary VLAN.
Example
7.17.21 show vlan private-vlan
This command shows the private VLAN configuration settings on the ECN330-
switch.
Syntax
show vlan private-vlan [primary | isolated]
• primary – Displays all primary VLANs, along with any assigned
promiscuous interfaces.
• isolated – Displays all isolated VLANs, along with the associated
primary VLAN, and any assigned isolated interfaces.
Default Setting
None
Command Mode
Privileged Executive
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config-if)#
To Next Page
Loading...
