Command Line Interface
606 1553-KDU 137 365 Uen D 2006-06-16
Related Commands
show sntp (section 7.5.49 on page 604)
7.5.51 calendar set
This command sets the system clock. It may be used if there is no time server
on the network, or if the ECN330-switch is not configured to receive signals from
a time server.
Syntax
calendar set <hour> <min> <sec> {<day> <month> <year> |
<month> <day> <year>}
• hour - Hour in 24-hour format. (Range: 0 - 23)
• minute - Minute. (Range: 0 - 59)
• sec - Second. (Range: 0 - 59)
• day - Day of month. (Range: 1 - 31)
• month - January | February | March | April | May |
June | July | August | September | October |
November | December
• year - Year (4-digit). (Range: 2001 - 2100)
Default Setting
None
Command Mode
Privileged Exec
To Next Page
Loading...
