Command Line Interface
528 1553-KDU 137 365 Uen D 2006-06-16
7.3 Command Groups
The system commands can be broken down into the functional groups as shown
in Table 32
.
Table 32 CLI Command Groups
Command Group Description Page
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI
531
System Management Display and setting of system information, basic modes of
operation, maximum frame size, file management,
console port and telnet settings, system logs, SMTP
alerts, and the system clock
540
Simple Network
Management Protocol
Activates authentication failure traps; configures
community access strings, and trap receivers
608
User Authentication Configures user names and passwords, logon access
using local or remote authentication, management access
through the web server, Telnet server and Secure Shell; as
well as port security, IEEE 802.1X port access control, and
restricted access based on specified IP addresses
632
Access Control List Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control code),
non-IP frames (based on MAC address or Ethernet type),
or for frame types within specific VLANs
690
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs
736
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks
756
Mirror Port Mirrors data to another port for analysis without affecting
the data passing through or the performance of the
monitored port
773
To Next Page
Loading...
