Configuring the ECN330-switch
106 1553-KDU 137 365 Uen D 2006-06-16
• Minutes (0-59) – The number of minutes before/after UTC.
• Direction – Configures the time zone to be before (east) or after (west)
UTC.
Web – Select SNTP, Clock Time Zone. Set the offset for the time zone relative
to the UTC, and click Apply.
Figure 32 Clock Time Zone
CLI - This example shows how to set the time zone for the system clock.
6.4 Simple Network Management Protocol
Simple Network Management Protocol (SNMP) is a communication protocol
designed specifically for managing devices on a network. Equipment commonly
managed with SNMP includes switches, routers and host computers. SNMP is
typically used to configure these devices for proper operation in a network
environment, as well as to monitor them to evaluate performance or detect
potential problems.
Managed devices supporting SNMP contain software, which runs locally on the
device and is referred to as an agent. A defined set of variables, known as
managed objects, is maintained by the SNMP agent and used to manage the
device. These objects are defined in a Management Information Base (MIB) that
provides a standard presentation of the information controlled by the agent.
Console(config)#clock timezone Dhaka hours 6 minute 0 after-UTC
Console#
To Next Page
Loading...
