Ericsson ECN330 User Manual

Command Line Interface
764 1553-KDU 137 365 Uen D 2006-06-16
Command Usage
• Ports are only allowed to join the same LAG if (1) the LACP system
priority matches, (2) the LACP port admin key matches, and (3) the
LACP port channel key matches (if configured).
• If the port channel admin key (lacp admin key - Port Channel) is not
set when a channel group is formed (that is, it has the null value of 0),
this key is set to the same value as the port admin key (lacp admin
key - Ethernet Interface) used by the interfaces that joined the group.
Note that when the LAG is no longer used, the port channel admin key
is reset to 0.
Example
7.10.6 lacp port-priority
This command configures LACP port priority. Use the no form to restore the
default setting.
Syntax
lacp {actor | partner} port-priority <priority>
no lacp {actor | partner} port-priority
• actor - The local side an aggregate link.
• partner - The remote side of an aggregate link.
• priority - LACP port priority is used to select a backup link.
(Range: 0-65535)
Default Setting
32768
Console(config)#interface port-channel 1
Console(config-if)#lacp admin-key 3
Console(config-if)#

Ericsson ECN330 Specifications

General

Brand	Ericsson
Model	ECN330
Category	Network Router
Language	English