Ericsson ECN330 User Manual

Command Line Interface
706 1553-KDU 137 365 Uen D 2006-06-16
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and it is bound to a different ACL,
the ECN330-switch will replace the old binding with the new one.
• A mask must be configured for an ACL rule before it can be bound to a
port.
Example
Related Commands
show ip access-list (section 7.8.4 on page 697)
7.8.9 show ip access-group
This command shows the ports assigned to IP ACLs.
Command Mode
Privileged Exec
Console(config)#int eth 1/2
Console(config-if)#ip access-group standard david in
Console(config-if)#

Ericsson ECN330 Specifications

General

Brand	Ericsson
Model	ECN330
Category	Network Router
Language	English